3 NHTSA safety recall campaigns were
found for the 1965 Chevrolet Belair.
NHTSA Recall 71V235000
Component:
ENGINE AND ENGINE COOLING:ENGINE
Recall date:
1971-12-29
Defect Summary
THERE IS A POSSIBILITY THAT A SEPARATED MOTOR MOUNT MAY ALLOW THE ENGINE TO LIFT, WHICH MAY AFFECT THE THROTTLE LINKAGE, MOMENTARILY INCREASING THROTTLE, POSSIBLY TO FULL THROTTLE.
Safety Risk
UNEXPECTED LOSS OF THROTTLE CONTROL MAY CAUSE LOSS OFVEHICLE CONTROL AND AN ACCIDENT.
Remedy
INSPECT ENGINE MOUNTS AND INSTALL RESTRAINTS WHICH WILL LIMIT ENGINE LIFT AND ELIMINATE POSSIBLE SECONDARY EFFECTS TO THE THROTTLE LINKAGE DUE TO ENGINE MOUNT SEPARATION.
NHTSA Recall 69V030000
Component:
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE
Recall date:
1969-02-28
Defect Summary
EXHAUST EMISSIONS (CARBON MONOXIDE) MAY ENTER THE INTERIOR OF THE VEHICLE WHEN THE EXHAUST PIPE IS SUBSTANTIALLY OUT THE DESIGN POSITION, DETERIORATED FROM USE, OR WHEN AN OPENING IN THE BODY DEVELOPS NEAR THE EXHAUST OUTLET AND, AT THE SAME TIME, A NEGATIVE AIR PRESSURE OCCURS IN THE VEHICLE INTERIOR.
Safety Risk
UNDER THESE CONDITIONS, VEHICLE OCCUPANTS MAY EXPERIENCECARBON MONOXIDE POISONING.
Remedy
RESEAL NEARBY BODY JOINTS AND REPLACE THE DRAW PLUG IN THE BODY WHICH WAS USED TO REMOVE SURPLUS BONDERIZING SOLUTION DURING MANUFACTURE.