4 NHTSA safety recall campaigns were
found for the 1991 Chevrolet G20.
NHTSA Recall 07E088000
Component:
EQUIPMENT
Recall date:
2007-10-24
Defect Summary
CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES.
Safety Risk
THIS CONDITION MAY CAUSE INADEQUATE SEALING AND LOSS OF ENGINE OIL, POSSIBLY RESULTING IN A FIRE.
Remedy
HONEYWELL WILL REPLACE THE AFFECTED OIL FILTERS FREE OF CHARGE. THE RECALL BEGAN DURING NOVEMBER 2007. OWNERS CAN CONTACT FRAM CUSTOMER SERVICE TOLL-FREE AT 1-800-890-2075.
NHTSA Recall 06E043000
Component:
FUEL SYSTEM, GASOLINE
Recall date:
2006-05-19
Defect Summary
CERTAIN REPLACEMENT FUEL FILTERS, FRAM BRAND NAME P/N G3727, WITH DATE CODES X52911 THROUGH X60801 SEQUENTIALLY OR X600141 AND A MEXICO COUNTRY OR ORIGIN MARKING ON THE FUEL FILTER HOUSING MANUFACTURED FROM OCTOBER 18, 2005, THROUGH MARCH 21, 2006, SOLD FOR USE ON THE VEHICLES LISTED ABOVE AND ON CERTAIN SCHOOL BUSES. (TO SEE THE SCHOOL BUS ENGINE SIZES, CLICK ON "DOCUMENT SEARCH" AND THEN "BUS APPLICATIONS"). THE CONNECTOR ON THE FUEL FILTER WAS NOT MANUFACTURED TO HONEYWELL'S SPECIFICATION. AS A RESULT, THE O-RING MAY NOT SEAT CORRECTLY ON THE FUEL LINE.
Safety Risk
THIS CONDITION MAY CAUSE AN INADEQUATE SEAL AT THE CONNECTION, POTENTIALLY LEADING TO A FUEL LEAK. IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE COULD OCCUR.
Remedy
HONEYWELL WILL NOTIFY OWNERS AND REPLACE THE FUEL FILTERS FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 18, 2006. OWNERS MAY CONTACT FRAM CUSTOMER SERVICE AT 1-800-890-2075 (OPTION 1).
NHTSA Recall 92V047000
Component:
SEAT BELTS:FRONT:ANCHORAGE
Recall date:
1992-04-02
Defect Summary
INSTALLATION OF SAFETY BELT ANCHORAGE BOLTS FAILED TO COMPLY WITH FMVSS 210.
Safety Risk
INCORRECT INSTALLATION OF SAFETY BELT ANCHORAGES COULDRESULT IN FAILURE OF THE SAFETY BELTS TO RESTRAIN SEAT OCCUPANTS IN THE EVENTOF A SUDDEN STOP OR ACCIDENT, AND COULD RESULT IN INJURY TO THE SEAT OCCUPANT.
Remedy
TIGHTEN THE D-RING ANCHORAGE BOLTS TO THE PILLAR POST TO THE CORRECT TORQUE.
NHTSA Recall 91V040000
Component:
SEATS
Recall date:
1991-03-11
Defect Summary
SEAT BACK OF THE REAR BENCH SEAT MAY BREAK AWAY FROM THE SEAT CUSHION IN AN ACCIDENT.
Safety Risk
SEAT OCCUPANT WOULD BE SUBJECT TO GREATER INJURY; VEHICLEWOULD NOT COMPLY WITH FMVSS 207.
Remedy
INSTALL REINFORCEMENT THAT RUNS FROM SIDE OF SEAT BACK FRAME ASSEMBLY TO SEAT CUSHION FRAME ASSEMBLY, STRENGTHENING THE SEAT BACK.
Important Recall Information
Recall applicability can depend on VIN and production
details. Confirm your specific vehicle with the
manufacturer or the official NHTSA VIN recall lookup.