3 NHTSA safety recall campaigns were
found for the 1990 Ford Festiva.
NHTSA Recall 96E017000
Component:
SUSPENSION:FRONT:CONTROL ARM
Recall date:
1996-06-24
Defect Summary
EQUIPMENT DESCRIPTION: AFTERMARKET BALL JOINT/CONTROL ARM MANUFACTURED BY MOOG INDUSTRIES. DUE TO MISPACKAGING, CERTAIN BALL JOINT/CONTROL ARM ASSEMBLIES WERE INCORRECTLY PLACED IN THE WRONG BOXES.
Safety Risk
THESE BALL JOINT/CONTROL ARM ASSEMBLIES WILL NOT FIT INTO THE FRAME RECESS WITHOUT BEING ALTERED. ALSO THE STUD IS UNDERSIZED AND WILL NOT FIT THE SPINDLE PROPERLY POSSIBLY CAUSING A LOSS OF STEERING CONTROL INCREASING THE RISK OF A VEHICLE ACCIDENT.
Remedy
MOOG WILL REPLACE THE INCORRECTLY PACKAGED ASSEMBLIES WITH CORRECT BALL JOINT/CONTROL ARM ASSEMBLIES.
NHTSA Recall 95V103011
Component:
SEAT BELTS:FRONT:BUCKLE ASSEMBLY
Recall date:
1995-06-27
Defect Summary
THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.
Safety Risk
THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH.
Remedy
OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THAT LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED, FREE OF CHARGE. THE MANUFACTURER IS DEVELOPING A REMEDY DESIGNED TO PREVENT FAILURE OF THE BUTTONS THAT ARE NOT CURRENTLY BROKEN.
NHTSA Recall 90V045000
Component:
SEAT BELTS:FRONT:WARNING LIGHT/DEVICES
Recall date:
1990-03-08
Defect Summary
THE "FASTEN SEAT BELTS" WARNING LIGHTS MAY NOT WORK WHEN THE IGNITION IS SWITCHED TO THE "ON" POSITION DURING COLD AMBIENT TEMPERATURES.
Safety Risk
OCCUPANTS WOULD NOT RECEIVE THIS WARNING TO USE SAFETY BELTS AND CARS WOULD NOT COMPLY WITH FMVSS 208.
Remedy
FORD WILL REPLACE INSTRUMENT CLUSTERS IN THE AFFECTED CARS.
Important Recall Information
Recall applicability can depend on VIN and production
details. Confirm your specific vehicle with the
manufacturer or the official NHTSA VIN recall lookup.