3 NHTSA safety recall campaigns were found for the 1979 Ford L Series (Heavy).
Component: VEHICLE SPEED CONTROL
Recall date: 1982-03-26
THE INVOLVED VEHICLES DO NOT CONFORM TO FEDERAL MOTOR VEHICLE STANDARD NO. 124, "ACCELERATOR CONTROL SYSTEMS", DUE TO FAILURE OF THE THROTTLE TO RETURN COMPLETELY TO IDLE UNDER CERTAIN CONDITIONS WITH ONE OF THE TWO ACCELERATOR CONTROL RETURN SPRINGS INOPERATIVE.
DEALER WILL INSPECT AND MODIFY THE THROTTLE TO MEET THE REQUIREMENTS OF THE STANDARD.
Component: SUSPENSION:MULTIPLE AXLE
Recall date: 1979-12-04
THE OPTIONAL TANDEM SUSPENSION ASSEMBLY MAY HAVE BEEN INSTALLED USING A STANDARD BEAM END ADAPTER KIT, RATHER THAN THE REQUIRED SPECIAL KIT. PROGRESSIVE DETERIORATION COULD OCCUR TO THE ADAPTER TO BEAM END BUSHING JOINT, POSSIBLY RESULTING IN FRACTURE OF THE BEAM TO AXLE ATTACHING BOLTS.
THE INCORRECT BEAM ADAPTERS WILL BE REPLACED ON NEW UNITS AND BEAM END ADAPTERS AND BUSHINGS WILL BE INSTALLED ON UNITS IN SERVICE, FREE OF CHARGE.
Component: SERVICE BRAKES, AIR:CONTROLS, PEDALS AND LINKAGES
Recall date: 1979-03-06
USE OF AN ALTERNATE ALUMINUM ALLOY WHICH HAS A LOWER STRENGTH IN HOT STATE, MAY ALLOW CRACKING OF BRAKE PEDAL LEVERS. REPEATED BRAKING OR HIGH BRAKE PEDAL LOADING MAY RESULT IN COMPLETE FRACTURE WHICH WOULD PREVENT APPLICATION OF THE SERVICE BRAKES.
BRAKE PEDAL LEVERS WILL BE REPLACED AT NO COST TO OWNER.
Recall applicability can depend on VIN and production details. Confirm your specific vehicle with the manufacturer or the official NHTSA VIN recall lookup.